10 Must-Try ESP32 Projects to Master IoT
Choose hardware for your first ESP32 project
- Touchscreen dashboard: 2.8-inch CYD ESP32-2432S028R — setup and display checks.
- Compact development board: ESP32-S3 Supermini or ESP32-C6 Supermini — choose the exact chip target and check the board pinout.
- Camera replacement: OV2640 or 75mm OV3660 — these are camera modules, not complete ESP32-CAM boards. Check connector, pinout, cable orientation and firmware support.
Check the selected option and package contents before ordering. Sensors, cables, power supplies and programming adapters are separate unless explicitly included.

1. Smart Weather Station
Build checklist: ESP32 board plus the parts listed below; verify voltage, interface and firmware compatibility before purchase. Difficulty: beginner to intermediate.
Environmental readings — BME680 is an alternative sensor path, not a drop-in replacement for the BME280 example.
View a compact ESP32-S3 development board; view the CYD option for a screen-based project. These boards may require changes to the example pin assignments.
Parts:
-
ESP32 DevKit
-
BME280 sensor (temp/humidity/pressure)
-
UV sensor (GY-ML8511)
-
OLED display
-
Sensors log data every 5 minutes.
-
Data displays locally and uploads to ThingSpeak.
2. Voice-Controlled Home Automation
Build checklist: ESP32 board plus the parts listed below; verify voltage, interface and firmware compatibility before purchase. Difficulty: intermediate.
I2S microphone setup — Voice recognition needs a compatible firmware or external service; a microphone alone does not provide it.
View a compact ESP32-S3 development board; view the CYD option for a screen-based project. These boards may require changes to the example pin assignments.
Parts:
-
ESP32 + Wi-Fi
-
DFPlayer Mini (audio feedback)
-
Relays + microphone module
-
Voice commands activate relays via ESP32.
-
Integrate with Google Home via IFTTT.
3. Portable GPS Tracker
Build checklist: ESP32 board plus the parts listed below; verify voltage, interface and firmware compatibility before purchase. Difficulty: intermediate.
GNSS first-fix guide — Remote tracking also needs a working uplink and suitable power supply. Check local cellular network support.
View a compact ESP32-S3 development board; view the CYD option for a screen-based project. These boards may require changes to the example pin assignments.
Parts:
-
ESP32 + GPS module (NEO-6M)
-
GSM module (SIM800L)
-
2000mAh Li-Po battery
-
GPS logs location every 10 minutes.
-
GSM sends coordinates to Blynk app.
4. Motion-Activated Security Camera
Build checklist: ESP32 board plus the parts listed below; verify voltage, interface and firmware compatibility before purchase. Difficulty: intermediate.
ESP32-CAM upload troubleshooting — Start with camera capture before adding motion recording. Camera modules alone require a compatible host board.
View a compact ESP32-S3 development board; view the CYD option for a screen-based project. These boards may require changes to the example pin assignments.
Parts:
-
ESP32-CAM module
-
PIR motion sensor
-
SD card module
-
PIR triggers 10-second video recording.
-
Files save to SD card + upload to Google Drive.
5. Smart Agriculture Sensor
Build checklist: ESP32 board plus the parts listed below; verify voltage, interface and firmware compatibility before purchase. Difficulty: intermediate.
Water-level sensing — Use this as a separate sensing exercise; it does not measure soil moisture.
View a compact ESP32-S3 development board; view the CYD option for a screen-based project. These boards may require changes to the example pin assignments.
Parts:
-
Soil moisture sensor
-
DS18B20 temperature sensor
-
LDR light sensor
-
Relay + water pump
-
Sensors check soil hourly.
-
ESP32 activates pump if moisture is low.
6. Bluetooth Beacon for Indoor Navigation
Build checklist: ESP32 board plus the parts listed below; verify voltage, interface and firmware compatibility before purchase. Difficulty: intermediate.
Arduino setup — Verify BLE support on the selected chip and firmware.
View a compact ESP32-S3 development board; view the CYD option for a screen-based project. These boards may require changes to the example pin assignments.
Parts:
-
ESP32 (BLE-enabled)
-
MIT App Inventor (mobile app)
-
ESP32 broadcasts location IDs via Bluetooth.
-
App displays directions to users.
7. Portable Air Quality Monitor
Build checklist: ESP32 board plus the parts listed below; verify voltage, interface and firmware compatibility before purchase. Difficulty: intermediate.
CO2 sensing — Use a dedicated CO2 sensor when actual CO2 readings are required.
View a compact ESP32-S3 development board; view the CYD option for a screen-based project. These boards may require changes to the example pin assignments.
Parts:
-
PM2.5 sensor (PMS5003)
-
CO2 sensor (MH-Z19)
-
RGB LED (alerts)
-
Sensors log data every 2 minutes.
-
LED turns red if PM2.5 exceeds safe levels.
8. Real-Time Energy Monitor
Build checklist: ESP32 board plus the parts listed below; verify voltage, interface and firmware compatibility before purchase. Difficulty: intermediate.
Low-voltage DC power measurements — This is a low-voltage alternative exercise. Do not connect an INA219 directly to mains electricity.
View a compact ESP32-S3 development board; view the CYD option for a screen-based project. These boards may require changes to the example pin assignments.
Parts:
-
Non-invasive current sensor (SCT-013)
-
Voltage sensor module
-
ESP32 + Wi-Fi
-
Sensors measure current/voltage 100x/second.
-
Data uploads to ThingSpeak for analysis.
9. Wearable Fitness Tracker
Build checklist: ESP32 board plus the parts listed below; verify voltage, interface and firmware compatibility before purchase. Difficulty: intermediate.
Motion sensor setup — Treat this as a hobby motion project, not a medical device.
View a compact ESP32-S3 development board; view the CYD option for a screen-based project. These boards may require changes to the example pin assignments.
Parts:
-
MAX30100 pulse sensor
-
MPU6050 accelerometer (steps)
-
OLED display
-
Heart rate/steps sync to phone via Bluetooth.
-
OLED shows real-time stats.
10. Automated Garden Irrigation
Build checklist: ESP32 board plus the parts listed below; verify voltage, interface and firmware compatibility before purchase. Difficulty: intermediate.
Water-level setup — Test the sensor separately before adding pumps or valves; these require suitable drivers and power supplies.
View a compact ESP32-S3 development board; view the CYD option for a screen-based project. These boards may require changes to the example pin assignments.
Parts:
-
Soil moisture sensor
-
Solenoid valve + pump
-
ESP32 + Wi-Fi
-
ESP32 checks soil daily.
-
Verifies rain forecasts via OpenWeatherMap API.
These projects showcase the ESP32’s flexibility—from smart homes to agriculture. Start with the weather station and scale up to GPS trackers! Share your builds in maker communities to inspire others.
======================================
