ESP32-S3 3.5-inch TFT Development Board, 320 x 480, Capacitive Touch (ES3C35P)

$31.05

MicroTech ES3C35P ESP32-S3 development board with a 3.5-inch 320 × 480 IPS capacitive touchscreen, 16 MB flash and 8 MB PSRAM.

Guaranteed Safe CheckoutPayPal, Mastercard, Visa, Maestro, Apple Pay and Google Pay logos
SKU: DS42060 Category:

Features & Compatibility

MicroTech ES3C35P ESP32-S3 development board with a 3.5-inch 320 × 480 IPS capacitive touchscreen, 16 MB flash and 8 MB PSRAM.

Specifications

Manufacturer MicroTech
Board Model ES3C35P
Controller ESP32-S3, dual-core Xtensa LX7, up to 240 MHz
Memory 16 MB flash and 8 MB PSRAM
Wireless 2.4 GHz Wi-Fi and Bluetooth LE
Display 3.5-inch IPS TFT, 320 x 480
Active Display Area 48.96 x 73.44 mm
LCD Driver and Interface ST77922, QSPI
Touch Type Capacitive
Touch Interface I2C (0x38)
Typical Brightness 300 cd/m2
USB Power Input 5 V via USB-C
Module Dimensions 54.5 x 101.5 x 10 mm

Connectors and controls

  • USB-C for power, firmware upload and debugging. Use a USB data cable for programming.
  • microSD slot, UART, I2C expansion, BOOT and RESET buttons.
  • Onboard microphone, external speaker connector and RGB indicator.
  • Battery connector and onboard charging circuit. Verify cell and connector polarity before connecting a battery.

Development setup

Use an example for the ES3C35P board revision. Match the ST77922 QSPI display settings and I2C touch configuration to the board documentation. Refer to the connector diagram and the rear photograph when checking connection locations.

Additional information

Weight 220 g
Manufacturer

MicroTech

Board Model

ES3C35P

Controller

ESP32-S3, dual-core Xtensa LX7, up to 240 MHz

Memory

16 MB flash and 8 MB PSRAM

Wireless

2.4 GHz Wi-Fi and Bluetooth LE

Display

3.5-inch IPS TFT, 320 x 480

Active Display Area

48.96 x 73.44 mm

LCD Driver and Interface

ST77922, QSPI

Touch Type

Capacitive

Touch Interface

I2C (0x38)

Typical Brightness

300 cd/m2

USB Power Input

5 V via USB-C

Module Dimensions

54.5 x 101.5 x 10 mm