ReSpeaker Lite with ESP32-S3: Home Assistant Setup

ESP32S Wiki: https://esp32s.com/wiki/respeaker-lite-esp32-s3-home-assistant/

Arduino-ESP32 3.3.0 compile check; no physical bench test.
Board profile: esp32:esp32:XIAO_ESP32S3:CDCOnBoot=default
Libraries: Only Arduino-ESP32 built-in APIs are required for the supplied example.

Read the guide before wiring.
This diagnostic requires XMOS 16 kHz I2S firmware; the Home Assistant configuration uses a different 48 kHz profile.
