Espressif ESP32-C2 Series ESPC2-05 Module, Wi-Fi + Bluetooth, Compatible with 05-Series Modules

$1.28

Espressif ESP32-C2 Series ESPC2-05 Module, Wi-Fi + Bluetooth, Compatible with 05-Series Modules

Package weight: 50 g per unit.

Guaranteed Safe CheckoutPayPal, Mastercard, Visa, Maestro, Apple Pay and Google Pay logos
SKU: AC41653 Categories: ,

Features & Compatibility

Technical documents

Parameter information

model:  ESPC2-05
brand:  Doit
Origin:  Chinese mainland
Antenna type:  Onboard

Specifications:  https://github.com/doit-open-org/chip_specification_sheet/blob/main/ESP32_C2/ESPC2-05_User_Manual.pdf

Image and text details

Documentation Download:
bbs.doit.am

Product Overview

The ESPC2-05 module is based on Espressif’s newly introduced ESP8684 chip. It is a highly cost-effective Wi-Fi and Bluetooth combo module featuring a white, high-temperature-resistant package. The module is designed for lighting applications and is compatible with the Tuya CB2L module.

Technical Specifications

1、Pinout Diagram

Espressif ESP32-C2 Series ESPC2-05 Module, Wi-Fi + Bluetooth, Compatible with 05-Series Modules

2、Package Drawing

Espressif ESP32-C2 Series ESPC2-05 Module, Wi-Fi + Bluetooth, Compatible with 05-Series Modules

3、schematic diagram

Espressif ESP32-C2 Series ESPC2-05 Module, Wi-Fi + Bluetooth, Compatible with 05-Series Modules

Firmware Download Procedure

Pull GPIO9 low by connecting it to ground to enter firmware download mode. After programming is complete, disconnect GPIO9 from ground; otherwise, the module will not operate normally.

Important Notes

  1. The ESP8684 may draw an instantaneous RF current of up to 400–500 mA. Therefore, the power supply must provide at least 500 mA. LDO regulators such as the XC6206 and 7533 must not be used.
  2. To meet the 500 mA power requirement, the power and ground traces should be at least 30 mil wide. If vias are required on the power traces, using two or three vias is recommended to reduce the impact of PCB manufacturing variations.
  3. For optimal RF performance, follow the module placement guidelines provided in the datasheet. If product certification is required, avoid routing parallel traces near the PCB antenna. The firmware download pads should be positioned away from the antenna.
  4. Completely erase the module’s flash memory before downloading the firmware. Otherwise, some modules may fail to boot.

Datasheets and documentation

Additional information

Weight 50 g
module-memory

N2